Are you trying to get your Google Pixel out of Fastboot mode? If so, youre not alone! Many Google Pixel users have faced this issue and it can be quite tricky to navigate.
But dont worry, this article will provide you with an easy way to get your device out of Fastboot mode quickly and easily.
Here, youll learn all about Fastboot mode, how to enter it, what it does, and how to get your Google Pixel out of it.
Well walk you through the steps youll need to take, including pressing and holding the power button, connecting the device to a computer, and resetting the device professionally.
So, if youre stuck in Fastboot mode, read on to learn how to get out of it!
Table of Contents
Short Answer
If your Google Pixel device is stuck in fastboot mode, you can try to boot it out of the mode by pressing and holding the Power button for about 10 seconds.
This will cause your device to reboot normally.
You can also try connecting the device to your computer and using the fastboot command to exit fastboot mode.
Lastly, if the device is still stuck in fastboot mode, you can try performing a factory reset to reset your device to its original state.
What is Fastboot Mode?
Fastboot mode is a special diagnostic and engineering mode on Google Pixel devices.
It is often used by developers to test the devices hardware and software.
It allows users to flash custom ROMs, install root packages, and perform other advanced actions.
Fastboot mode is not accessible through the standard Android user interface, and instead is accessed through a combination of key presses or a command line on a computer.
When the device is in Fastboot mode, it is essentially in a state of suspended animation, waiting for instructions from the user.
The device will not respond to any input from the user, such as pressing the power button, until it is taken out of Fastboot mode.
This makes it a great tool for developers, but it can also be a problem if the device accidentally enters Fastboot mode and stays there.
This can be the result of a misconfiguration or a software bug, and it can be difficult to escape from this state without help.
How to Enter Fastboot Mode?
Entering Fastboot mode is the first step to getting your Google Pixel device out of Fastboot mode, if its stuck there.
To enter Fastboot mode, press and hold the Volume Down and Power buttons simultaneously for a few seconds.
Your device should then enter Fastboot mode.
You should see a green Android robot with the words Start written underneath it, indicating that you are in Fastboot mode.
Once you are in Fastboot mode, you can then proceed to the next step of getting your device out of Fastboot mode.
What Does Fastboot Mode Do?
Fastboot mode is a special mode found on all Android devices.
It is used to flash a devices firmware, kernel, and other system files.
It can also be used to unlock the bootloader, which allows users to install custom ROMs.
When your Google Pixel device is stuck in Fastboot mode, it is unable to boot into the normal Android operating system.
As a result, it is important to understand how to get your device out of this mode and back to normal operation.
When a device is in Fastboot mode, it will display a text-based menu with options such as Recovery, Bootloader, and Fastboot.
Navigating this menu can be tricky, so its important to understand how to get out of it.
If you are unable to figure it out, you can always try pressing and holding the power button for 10-20 seconds.
This may work, but if it doesnt, you will need to connect your device to a computer with a USB cable and then run the adb reboot bootloader command.
If none of these methods work, you may need to take the device to a repair shop to have it professionally reset.
It is important to note that this is a last resort and should only be done if all other methods have failed.
Additionally, resetting your device may cause you to lose all of your data, so its important to make sure you have a backup before attempting a reset.
By following these steps, you should be able to get your Google Pixel device out of Fastboot mode and back to normal operation.
It may take some trial and error, but if you are persistent, you should eventually be successful.
How to Get Google Pixel Out of Fastboot Mode?
If your Google Pixel device is stuck in Fastboot mode, there is no need to panic.
Fastboot mode is a bootloader mode that allows users to modify the system partition on an Android device.
It is somewhat similar to the Recovery Mode, but it is more advanced and powerful.
Fortunately, there are a few simple steps you can take to get your device out of Fastboot mode and back into normal operation.
The first step is to try pressing and holding the power button for 10-20 seconds.
This can sometimes force the device to restart and exit Fastboot mode.
If this doesnt work, then you can try connecting your device to a computer with a USB cable and then running the adb reboot bootloader command.
This command can be used to enter or exit Fastboot mode.
If this also fails, then you may need to take the device to a repair shop to have it professionally reset.
It is important to note that Fastboot mode is designed for advanced users and should not be used by those who are unfamiliar with the process.
If you are not comfortable with the steps outlined above, then it is best to take your device to a professional for assistance.
Additionally, if you are attempting to enter Fastboot mode to flash a custom ROM or root your device, it is important to make sure you are using the most up-to-date version of the ROM or root tool.
Outdated versions may not work with your device, which can cause the device to become stuck in Fastboot mode.
In summary, getting your Google Pixel device out of Fastboot mode is relatively easy.
Simply press and hold the power button for 10-20 seconds, or connect the device to a computer and run the adb reboot bootloader command.
If these steps fail, then it is best to take the device to a repair shop to have it professionally reset.
Step 1
If youre stuck in Fastboot mode on your Google Pixel device, the first step you should take is to press and hold the power button for 10-20 seconds.
This is a simple but effective way to reset your device and potentially get it out of Fastboot mode.
Its worth noting that this step should only be used as a last resort, as it is possible to cause problems with your devices software if youre not careful.
If this method doesnt work, then its time to move on to the next step.
Step 2
If pressing and holding the power button for 10-20 seconds doesnt work, your next step is to connect your Google Pixel device to a computer with a USB cable and then run the adb reboot bootloader command.
This command will attempt to restart your device from the fastboot mode and, if successful, your device will reboot into its normal mode.
Its important to note that this command will only work if you have the Android Software Development Kit (SDK) installed in your computer and your device is properly connected to the computer.
If the command fails, it could be because the SDK is not installed or because the USB connection is not working correctly.
In order to get the adb reboot bootloader command to work correctly, youll need to enable USB debugging on your device.
To do this, go to the Settings menu on your device, select Developer Options and then select USB Debugging.
Once enabled, youll be able to use the command.
Once youve connected your device to your computer and enabled USB debugging, you can try running the command again.
If successful, you should see a message on your devices screen that says Fastboot mode.
At this point, you can disconnect your device and it should be out of fastboot mode and back to its normal mode.
If the adb reboot bootloader command fails, then you may need to take your device to a repair shop to have it professionally reset.
This should be a last resort, as it could be a costly process.
However, it may be the only way to get your device out of fastboot mode.
Step 3
If you have already tried the two steps above and your Google Pixel device is still stuck in Fastboot mode, you may need to take the device to a repair shop to have it professionally reset.
Professional resetting is the most reliable way to get your device out of this state but it can be an expensive solution.
It is best to try the other two steps first to see if you can get your device out of Fastboot mode without having to pay for a professional reset.
When you take your device to a repair shop, they will typically use a specialized tool to reset the device.
This can be done in a few different ways, including by using a USB cable to connect the device to a computer and then running a factory reset command.
This will erase all of the data on the device and restore it to its factory settings.
The repair shop may also use a different method, such as using a special data recovery tool to reset the device without erasing any data.
Once the device is reset, it should be able to boot normally and all of the data on it should remain intact.
However, it is important to note that any data stored on the device before it was reset will be lost.
So, it is always a good idea to back up your data before taking your device to a repair shop to have it reset.
In conclusion, if your Google Pixel device is stuck in Fastboot mode, you can try pressing and holding the power button for 10-20 seconds, or connecting the device to a computer and then running the adb reboot bootloader command.
If neither of these steps work, you may need to take the device to a repair shop to have it professionally reset.
Final Thoughts
Getting your Google Pixel out of Fastboot mode is easy with the right steps.
First, try pressing and holding the power button for 10-20 seconds.
If that doesnt work, try connecting your device to a computer with a USB cable and then running the adb reboot bootloader command.
If that fails, you may need to take the device to a repair shop to have it professionally reset.
Now that you know how to get your Google Pixel out of Fastboot mode, you can confidently tackle any issues that arise.